Plasmaaktivierung von Polypropylenoberflächen zur Optimierung von Klebverbunden mit Cyanacrylat Klebstoffen im Hinblick auf die mechanischen Eigenschaften - Plasma modification of polypropylene for an optimization of bonds using cyanoacrylate adhesives from a viewpoint of mechanical properties
In the present study low pressure plasma pretreatment has been investigated as an alternative to chemical primer pretreatment. The mechanical properties of Polypropylene-Cyanoacrylate bonding which were both, plasma and primer pretreated were compared. From the investigations, where the plasma parameters were systematically varied, it can be concluded that a very short exposure to an oxygen plasma and new curing conditions led to the best results. The shear strength after plasma pretreatment became even higher than after primer pretreatment.
Advisor:Prof. Dr.-Ing. Horst Nowack; Prof. Dr. rer.nat. Hans Brockmann
School:Universität Duisburg-Essen, Standort Essen
Source Type:Master's Thesis
Keywords:energie maschinen und fertigungstechnik gerhard mercator universitaet
Date of Publication:01/28/2002