Plasma Flow Velocity Measurements Using A Gundestrup Probe In The STOR-M Tokamak

by St. Germaine, Geoffrey Martin

Abstract (Summary)
The profile of the poloidal velocity in the edge region of tokamak plasmas has been identified as playing a major role in the confinement of particles and energy. It has been suggested that a strongly sheared poloidal flow can reduce particle and energy losses by the stabilization of unstable modes and decorrelation of turbulence the edge region of the plasma. A Gundestrup probe, a Mach probe array, is used to measure both the parallel and perpendicular flow velocities in the Saskatchewan Torus-Modified (STOR-M) tokamak during several discharge conditions. It is observed that during Ohmic discharges there is no velocity shear and the direction of the parallel flow is independent of the direction of the toroidal magnetic field. During H-mode induced by a turbulent heating current pulse, a region of strong velocity shear develops in the plasma edge and an edge transport barrier develops. This results in a short period of improved particle and energy confinement with reduced fluctuation amplitudes. During electrode biasing experiments, a stainless steel biasing electrode is inserted into the plasma up to r = 82 mm and biased to +500 V relative to the vacuum chamber. It is observed that the particle confinement improves during the biasing phase while the energy confinement is degraded. A region of weak shear in the poloidal flow is observed in the plasma scrapeoff layer (SOL). The results from STOR-M are compared with results from data taken in the Czech Academy of Sciences Torus (CASTOR) tokamak during both Ohmic discharges and discharges with electrode biasing.
Bibliographical Information:

Advisor:Akira Hirose; Michael Bradley; Sasha Koustov; Robert Johanson; Alan Manson; Chijin Xiao

School:University of Saskatchewan

School Location:Canada - Saskatchewan

Source Type:Master's Thesis

Keywords:castor toroidal flow poloidal rake probe mach langmuir turbulent heating electrode biasing


Date of Publication:08/22/2006

© 2009 All Rights Reserved.