MIMO Selection and Modeling Evaluations for Indoor Wireless Environments

by Dong, Lu

Abstract (Summary)
Array-to-array, or multiple-input multiple-output (MIMO), links are known to provide extremely high spectral efficiencies in rich multipath environments, such as indoor wireless environments. The selection of a subset of receiver array antennas for a MIMO wireless link has been studied by many as a way to reduce cost and complexity in a MIMO system while providing diversity gain. Combined with a switched multi-beam beamformer, it becomes the beam selection system that can gain high signal-to-interference ratio (SIR) improvement in an interference-imited environment. The objective of this research is to evaluate the performance of low-complexity antenna or beam subset selection methods for small MIMO networks. The types of networks include (1) point-to-point MIMO links with out-of-system interference, (2)multi-user networks with a single, but possibly spatially distributed access point. We evaluate various selection techniques on measured indoor channels, which has not been done before. We propose a new practical selection metric, the peak-to-trough ratio of orthogonal frequency division multiplexing (OFDM) training symbols. We also compare antenna and beam selection on measured indoor channels under more general conditions than has previously been done. Finally, we consider some channel modeling issues associated with beamformers. We investigate the validity of three types of statistical MIMO channel models. A new beamformer is designed based on the ideal of the ``Weichselberger model.'
Bibliographical Information:

Advisor:Li, Wing Suet; Altunbasak, Yucel; Barry, John; Durgin, Gregory; Ingram, Mary Ann

School:Georgia Institute of Technology

School Location:USA - Georgia

Source Type:Master's Thesis

Keywords:electrical and computer engineering


Date of Publication:11/12/2007

© 2009 All Rights Reserved.