Details

Integrated Inspection for Precision Part Production

by Chen, Austin Hua-Ren

Abstract (Summary)
This research develops a methodology for enhancing the performance of a precision computer numerically controlled (CNC) machine tool. The ability to precisely maintain the desired relative position between the cutting tool and the workpiece along the cutting trajectory has a major impact on the dimensional accuracy of the finished part. It is important to ensure that the workpiece geometry satisfies tolerances before removing it from the machine tool. Traditional manufacturing procedures do not catch bad parts until the post-process inspection stage, when the part has already been removed from the setup. Subsequent attempts at re-machining require that the workpiece be re-fixtured back on the machine which often introduces more error into the process. The objective of this research is to develop a methodology that integrates pre-process calibration and process-intermittent gaging to enhance the ability of a two-axis vertical turning center to cut a circular arc. The developed methodology is straightforward and integrates the usage of commercially available instrumentation such as the ball bar and on-machine probe for error identification, prediction, and compensation.
Bibliographical Information:

Advisor:Liang, Steven; griffin, Paul; Zhou, Chen; Melkote, Shreyes; Kurfess, Thomas

School:Georgia Institute of Technology

School Location:USA - Georgia

Source Type:Master's Thesis

Keywords:mechanical engineering

ISBN:

Date of Publication:04/06/2006

© 2009 OpenThesis.org. All Rights Reserved.