Details

Hydraulic press construction for fitting the bearings to the housing

by Egüz, Izzettin Osman

Abstract (Summary)
This report was written as a result of a Bachelor Degree Project, together with Swepart Transmission AB. The report contains the construction of a hydraulic press for the assembly operation.The project started with a new construction of a hydraulic press for the bearings’ assembly. The goal within the thesis work was to fit the three bearings to the housing by only one press motion. This operation should be very safety because of the sensitive tolerance at the bearings and housing. Construction of the cylinders, rams and bolster were the most important parts at this project because this parts’ functions are very important for this assembly.The next step of this thesis was to calculate the hydraulic press components’ parameters and then choose the suitable components. The focus was to choose more useful and reliable components.The hydraulic press was modeled in the CAD program Solid Works and 2D technical drawing was drawn in the Autocad. The frame material was chosen and the frame was analysised in the Solid Works.
Bibliographical Information:

Advisor:

School:Växjö universitet

School Location:Sweden

Source Type:Master's Thesis

Keywords:fitting volvo trucks’ housing bearing hydraulic press cylinder ram bolster modelling analysis

ISBN:

Date of Publication:06/12/2008

© 2009 OpenThesis.org. All Rights Reserved.