Details

Enhanced boiling heat transfer from a novel nanodendritic micro-porous copper structure

by Furberg, Richard

Abstract (Summary)
Following licentiate thesis is a summary of the advances made within the research project - Micro- and nano structured surfaces for enhanced boiling heat transfer – which is a collaboration effort between the Divi-sion of Applied Thermodynamics and Refrigeration and the Division of Materials Chemistry at the Royal Institute of Technology (KTH).The main objectives with this research project has been to: develop methods for producing highly efficient boiling surfaces with well defined micro- and nano-structured porous surfaces by the use of micro- and nano-manufacturing techniques. This objective has been achieved and the result is a novel micro-porous surface structure comprising dendritically ordered nano-particles of cop-per. The structure was fabricated by a high-current-density electrode-position process, in which the evolution of hydrogen bubbles serve as a dynamic masking template to the growth of the dendritic copper struc-ture. Important variables were identified that affect the production of the structure and its features, such as surface orientation during electrode-position, pressure and temperature of electrolyte, and a final heat treat-ment of the surface under reduced atmosphere, all of which have previ-ously not been reported on.Experimental tests have been conducted in a widely used refrigerant, R134a, where the micro-porous structure was shown to enhance the boiling performance of a copper surface over 15 times compared to a regular copper surface. The boiling characteristics of the structure were found to be dependent on controllable surface characteristics. The re-markably good boiling performance of the novel micro-porous en-hancement structure has been attributed to its high porosity ( ~94%), a dendritically formed and exceptionally large surface area, and to a high density of well suited vapor escape channels (>50 per mm2).A patent application, intended to protect the enhancement structure and its fabrication method, was submitted to the Swedish patent authorities (PRV) on March 1st, 2006.
Bibliographical Information:

Advisor:

School:Kungliga Tekniska högskolan

School Location:Sweden

Source Type:Master's Thesis

Keywords:TECHNOLOGY; Engineering mechanics; Mechanical and thermal engineering; Thermal energy engineering

ISBN:

Date of Publication:01/01/2006

© 2009 OpenThesis.org. All Rights Reserved.