Design av dörr till kaffeautomat : Designing a door to a coffee vending machine

by Holmgren, Robin; Bogren, Mikael

Abstract (Summary)
This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today’s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up. After a deliberation, the project group at Jede determined to proceed with one of the concepts.This concept was modeled in the CAD program Pro Engineer, and was later on used to produce a full-scale model of the door. After having evaluated the prototype and making the door compatible with the components that were to be used, a satisfying result approached.When the project was brought to its end, all material was handed over to the assigner, including a computer model that will be used to manufacture moulding forms. If everything goes as planned, the coffee vending machine will be available on the market during the beginning of 2008.To sum up the project a discussion concerning the assignment and all its matters will be brought up in the end of this report.
Bibliographical Information:


School:Högskolan i Skövde

School Location:Sweden

Source Type:Master's Thesis



Date of Publication:06/21/2007

© 2009 All Rights Reserved.