Details

Design and Analysis of Intelligent Fuzzy Tension Controllers for Rolling Mills

by Liu, Jingrong

Abstract (Summary)
This thesis presents a fuzzy logic controller aimed at maintaining constant tension between two adjacent stands in tandem rolling mills. The fuzzy tension controller monitors tension variation by resorting to electric current comparison of different operation modes and sets the reference for speed controller of the upstream stand. Based on modeling the rolling stand as a single input single output linear discrete system, which works in the normal mode and is subject to internal and external noise, the element settings and parameter selections in the design of the fuzzy controller are discussed. To improve the performance of the fuzzy controller, a dynamic fuzzy controller is proposed. By switching the fuzzy controller elements in relation to the step response, both transient and stationary performances are enhanced. To endow the fuzzy controller with intelligence of generalization, flexibility and adaptivity, self-learning techniques are introduced to obtain fuzzy controller parameters. With the inclusion of supervision and concern for conventional control criteria, the parameters of the fuzzy inference system are tuned by a backward propagation algorithm or their optimal values are located by means of a genetic algorithm. In simulations, the neuro-fuzzy tension controller exhibits the real-time applicability, while the genetic fuzzy tension controller reveals an outstanding global optimization ability.
Bibliographical Information:

Advisor:

School:University of Waterloo

School Location:Canada - Ontario

Source Type:Master's Thesis

Keywords:electrical computer engineering fuzzy controller neural network genetic algorithm

ISBN:

Date of Publication:01/01/2002

© 2009 OpenThesis.org. All Rights Reserved.