DEVELOPMENT OF AN EMI MEASUREMENT SYSTEM : Performance Analysis of Bluetooth communication under noise environment

by Perez, Felix; Ferrer, Javier

Abstract (Summary)
This thesis is a project carried out at the “Centre for RF Measurements Technology of Gävle”. The first aim of this work was basically to develop an EMI measurement system, to that purpose, it has been used an EMI Tester receiver, Spectrum Analyzer and a broadband antenna. Tables and graphics are shown to provide the values of the different detectors utilized.Using this measurement system, an interference file was recorded and then inserted in a Bluetooth communication model. The interference file was simulated with Matlab Simulink, to check how the interference affected the communication; the effects of the signal degradation are presented in a graphic.Finally a real Bluetooth communication was established using two Bluetooth modules from Free2Move Company, to prove that the effect of microwave oven interferences produces the increase of transmission time and therefore decrease the Throughput.
Bibliographical Information:


School:Högskolan i Gävle

School Location:Sweden

Source Type:Master's Thesis

Keywords:emi bluetooth


Date of Publication:09/29/2008

© 2009 All Rights Reserved.