Details

Construction of a 1014.8nm fiber amplifier for quadrupling into the UV

by Giuoco, Frank Joseph

Abstract (Summary)
A fiber amplifier is constructed at 1014.8nm and then frequency doubled to produce 507.4nm. This could then be frequency doubled again to produce 253.7 radiation. The fiber amplifier consists of Ytterbium doped double-clad fiber cooled to low temperatures and incorperates a diode laser as the seed source. The amplifier is built in a two stage configuration with high power diode lasers at 980nm pumping each stage. The output of the fiber amplifer is then doubled in a PPLN crystal and redoubled in a BBO cavity. Measurements are taken throughout the system to determine ouput powers from the first stage and from the fiber amplifier as a whole.
Bibliographical Information:

Advisor:Fry, E. S.; Kenefick, R. A.; Taylor, H. F.

School:Texas A&M University

School Location:USA - Texas

Source Type:Master's Thesis

Keywords:fiber amplifier 1014 8 ytterbium

ISBN:

Date of Publication:12/01/2003

© 2009 OpenThesis.org. All Rights Reserved.